Contract Rates & Specifications
Foundation Trenches, for all clauses of soil including cutting, Shoring, Strutting, dewatering etc. Rubble Foundation: 60 x 90 cm in Size
60cm x 90cm fitting and packing of Rubble with available soil.
45cm x 45 cm fitting and packing of Rubble in cement mortar 1:6 as per Standard Architectural Specification.
Reinforced Cement Concrete in 1:2:4 as per Architectural Drawings, Size shall be 45 x 10 as per Standard Architectural Specification.
Filling in basement shall be done with available Red Earth or Slurry Dust.
Good Quality Laterate Masonry in 20cm thick; Cement Mortar in 1:6 Client may opt for Good Quality Semi Wire-Cut Brick instead of Laterate; @Rs.60/- Extra/Sft
Single Brick Work shall be used for the Parapet Work.
Plain Cement Concrete 1:4:8 as per Standard Architectural Specifications
RCC shall be build using 20mm Downgraded aggregates in M20 Mix as per the given structural drawings.
RCC Beams shall be build; using 20mm Downgraded aggregates in M20 Mix as per the given structural drawings.
RCC Slabs with minimum 10CM thickness shall be build; using 20mm Downgraded aggregates in M20 Mix as per the given structural drawings.
RCC Sun Shades shall be build; using 20mm Downgraded aggregates in M20 Mix as per Standard Architectural Specification
RCC Stairs shall be build; using 20mm Downgraded aggregates in M20 Mix as per Standard Architectural Specification
RCC Lintel shall be build; using 20mm Downgraded aggregates in M20 Mix as per the given structural drawings.
Fixing Steel Reinforcement (High Yield Strength Deformed Bars Conforming to Fe 500) for R.C.C in all items, Work including transporting, recoiling, cutting, straightening, bending and placing in position at all levels & binding with approved gauge binding wire.
43 Graded Ordinary Portland cement or Portland Pozzolana Cement of Dalmia, Chettinadu, Ramco, Malabar or Equivalent shall be used for all the works.
Good Quality Crushed M-Sand (POABS) shall be used for all RCC and Super Structural Works, Good Quality River Sand or Crushed M-Sand which is specially graded for the plastering purpose shall be used for all plastering works as per the availability in the open Market.
Good Quality Hard Wood shall be used for all the windows and Door Frames in size of 10cmX 6.5cm. However the GF front door frame shall be in size of 15cm X 10cm. All windows frames shall be secured with Flat & 12 MM Rods. For all Paneled and Glazed Shutters also Good Quality Hard Wood shall be used.
Inside Plastering Work shall be in Cement Mortar 1:6, 9 to 12 MM Thick
Ceiling plastering work shall be in 1:3 Cement Mortar, below 10MM Thick.
Outside wall Plastering Work shall be in Cement Mortar 1:5, 12 to 15 MM Thick
Stainless Steel Handrails shall be used in Staircase Areas and upper living Cut-Off Areas.
Cables: Finolex or V.Guard Switches & Sockets: Modular Switches & Sockets from Hawells Final Fittings such as Fancy Lightings & Ceiling Fans should be provided by the Client at Site.
Vitrified tiles, Ceramic Tiles, Marble Flooring, Granite Flooring, Wood Flooring, Laminated Wood Flooring, Vinyl Flooring, Glass Flooring, Terracotta Flooring (Priced at Maximum Rate of Rs.75/- per Sq.Ft) Golden galaxy Granites for kitchen slabs
Good Quality tiles shall be used. (Priced at Maximum Rate of Rs.50/- per Sq.Ft)
Complete Plumbing and Sanitary Works shall be executed by the Contractor; Using the below mentioned Brands PVC Pipes: Thomson CP Fittings: _ Wall Mixer @Max.Rate: Rs.3000/- _ Long Body Taps @Max.Rate: Rs.600/- _ Health Faucets @Max.Rate: Rs.750/- _ Angle Valves @Max.Rate: Rs.400/- _ Shower Set @Max.Rate: Rs.1000/- _ Pillar Taps Bathrooms@Max.Rate:Rs.600/-_ Pillar Tap for Hall @Max.Rate: Rs.1200/- _ Sink Taps @Max.Rate: Rs.1250/- Sanitary: Single Unit Imported Closet (Priced at Maximum Rate of Rs.9000/-per Piece) and Half Pedestal Wash Basin Dining Area: Wash Basin for Dinning Area (Priced at Max. Rate of Rs.4000/) Water Tank: Aqua-Tech, Sintex or Equivalent Quality of 1000 Liter Capacity Kitchen Sink: 24 x 18 Sink for Kitchen and 18 x 16 Sink for Work Area
Good Quality Terra Cotta Roofing tiles shall be used. (Priced at Maximum Rate of Rs.30/- per Sq.Ft)
Interior and Exterior painting which includes one coat white cement, one coat putty, one coat primer and one coat paint of suitable colors.